Universal Turbo Boost Gauge Pressure MAP Sensor (0 - 30 psi)
Fits most makes and models.
- Pressure Input: 0 ~ 30 PSI (2 Bar / 0.2MPa)
- Output: 0 ~ 3 VDC
- Pressure Inlet Diameter: 6mm (0.24”)
- Dimensions: 50 x 30 x 18mm (2” x 1.2” x 0.7”)
- Accuracy: +/- 1%
- Power: 12 VDC
SENSOR RANGE (BAR) : -2.0 BAR (Vacuum) to +2.0 BAR (Boost)
SENSOR RANGE (PSI) : -30 PSI (Vacuum) to +30 PSI (Boost)
These universal sensors are the three wire type and have the industry standard Vacuum Hose inlet .
The three wires are red ,black and white and are wired as follows ;-
RED WIRE ; +12V
BLACK WIRE ; NEGATIVE
WHITE WIRE ; CONNECT TO THE GAUGE SENSOR INPUT CONNECTION.
Many after market gauges (but not all ,by any means) have a green coloured wire sensor input to the gauge ,so in this case you would connect the sensor white wire to the gauge green coloured wire.
There is no three wire plug provided as most gauges have their own unique plastic connector ,therefore you may need to cut the plug off your existing sensor to hard wire the sensor to the existing wires and plug.
T connector and 1 meter of plastic tube are also included.