Temperature Sensors - Digital Gauges
Cart 0
Exhaust Temperature Gauge Kit with Exposed Sensor Probe 1/8" NPT, EGT Pyrometer. - Mainline Sensors

Exhaust Temperature Gauge Kit with Exposed Sensor Probe 1/8" NPT, EGT Pyrometer.

£58.00

Universal Exhaust Gas Temperature Gauge Kit Exposed Tip Sensor 1/8" NPT.

ALL PRICES INCLUSIVE OF VAT

This EGT gauge kit comes with our high quality exposed tip sensor for more accurate temperature readings the kit is used to monitor your vehicles exhaust gas temperature. Monitoring the EGT gives the driver early indication if the engine is overheating or over/under fueling, which could result in engine failure and costly repairs. Fitting and using an EGT gauge is an inexpensive way to safeguard your engine from expensive repairs due to excessive exhaust gas temperatures.

High quality EGT kit.

This kit has been designed to monitor high temperature environments in motorsports applications when increasing the fuelling and boost pressures of your engine. This naturally increases the EGT. It is important to log the EGT of an engine as there is a crucial limit which should not be surpassed to ensure maintained longevity. This is a good tool in monitoring the efficiency of uprated intercoolers etc.

Turbocharged engines have much more complex EGT demands. As boost increases, the backpressure and exhaust temps do as well.  Also, its common to retard timing in order to prevent detonation.  So to make sure that excessive heat doesn’t damage the turbocharger or exhaust components, its important to monitor exhaust temps in higher compression or high boost turbo motors, especially when ignition retard strategies like launch control, anti-lag or traction control are used.

Fitting and using this EGT gauge is an inexpensive way to safeguard your engine from expensive repairs due to excessive exhaust gas temperatures. This kit is suitable for turbo & non turbo engines including popular Sports/Performance Cars, 4WD, Boats, Planes, Trucks.

The K thermocouple EGT probe that can be installed to either your exhaust manifold or exhaust pipe also comes with weld on bung for easier installation.

The temperature measurement is cold junction compensated for high accuracy. Very few EGT gauges on the market have the cold junction compensation circuit. Most of them cost several times more than this gauge.

Gauge reads in Celsius or Fahrenheit.

Specifications:

Kit includes: Gauge, Exposed Sensor Cable with 1/8" NPT fitting & Weld Bung.

Exposed EGT Probe:

Probe Material : High quality Stainless Steel with Platinum elements.
Probe Diameter : 5mm (0.2”)
Probe Length : L1 80mm (3.15”) L2 30mm (1.18”)
Threads : 1/8” NPT Adjustable Compression Fittings
Cable Length : 3 Meters
Cable Insulation : Fiberglass braiding with stainless steel overbraiding
Type : Ungrounded
Temperature Range : -100 ~ 1250 degree Celsius

EGT Gauge :

Display Range : 0 ~ 1300 Celsius or 2372 Fahrenheit
Display Type : 3 1/2 LED (Red/Blue)
Dimensions : 79W x 43H x 25D mm (3.1" x 1.7" x 1")
Panel Cut : 74 x 40mm (2.9" x 1.6")
Accuracy : +/- 1%
Power : 12v DC

Stainless Female Weld Bung with Male Plug:

Material : Stainless Steel
Threads : 1/8” NPT
Outer Diameter : 0.5" (12mm)
Length : 0.6" (15mm)

INSTALL GUIDELINES INCLUDED.


Share this Product


More from this collection